5x RCWL 0516 Microwave Radar Sensor Module Body 4-28V CL Induction C1U0

 5x RCWL 0516 Microwave Radar Sensor Module Body 4-28V CL Induction C1U0 | eBay



Description:

Description:

100% brand new and high quality

1.Operating Voltage:4-28V

2.Operating Current:2.8mA (typical);3mA (max)

3.Detection Distance:5-9m

4.Transmitting Power:20mW (typical);30mW (max)

5.Output Voltage:3.2-3.4V

6.Output Voltage Driving Capacity:100mA

7.Trigger Way:repeat trigger

8.Output Control Low Level:0V

9.Output Control High Level:3.3V

10.Operating Temperature:-20~80 celsius

11.Storage Temperature:-40~100 celsius

Adjustment Part Introduction:

1.C-TM
Adjust repeat trigger time,default trigger time is 2s;increasing capacitor's capacity will make repeat trigger time longer;and actual counting trigger time can operate as below:

Stick capacitor on C-TM,test 9196 3-pin frequency F,repeat trigger time T=(1/f)*32768

2.R-GN
Detection distance adjustment;connect with resistor and detection distance will become shorter;if not connect,detection distance is 7m;if connect with 1M ohm resistor,detection distance is 5m

3.R-CDS
Internal VCC parallel connect with internal 1M ohm resistor to CDS pin (that is 196 9-pin) by R-CDS ,CDS connects with photoresistor,you can close detection function at night

Pin Definition:
1.3V3:3V3 power output
2.GND:ground
3.OUT:control output;when detect moving objects,it will output high level
4.VIN:input voltage,4-28V
5.CDS:enable control chip,lower than 0.7V,OUT will output low level all the time

Note:
U1 in addition to 8 feet, the rest of the pin compatible with the BISS0001, other features are compatible

color: as the picture shows

size: app 17.3*35.9 mm

package: 5 pcs module in a pack

SKU: BSP7611

Comments

Popular posts from this blog

nanoCH32V203 Dev Board

ESP-M3 Mini